Take advantage of cathodic protection materials to build a wonderful tomorrow
Cathodic Protection technology is the technology to stop or prevent the protected metal structure from electrochemical corrosion. Reasonable cathodic protection can lengthen the service life of metal structure and ensure its safe operation.
Basic introduction
The corrosive environment which metal materials may encounter is very complicated. The conditions and factors which cause corrosion are different and the forms of corrosion vary accordingly. Some materials may corrode in a environment but not in other surroundings. Choosing the right materials as per applications helps to improve the reliability and adaptability of anti-corrosion materials. Yuxi can provide a series of anti-corrosion materials as per customers’ requirements.

Anti-corrosion alloys

Besides, Yuxi can provide the following products:The highest grade compound board whose compound rate is 100%. Our welding technology is mature and leading at home.


  • GB/T 8546 TI- Stainless Steel Compound Board

Type

Product Grade

Binding Rate Requirement

Explosive welding

Explosive rolling

0

B0

BR0

100%

1

B1

BR1

98%, each nonbinding length must be less than 75mm, area less than 45cm2

2

B2

BR2

95%, each nonbinding area must be less than 65cm2


  • GB/T 8547 TI- Steel Compound Board

Type

Product Grade

Binding Rate Requirement

Explosive welding

Explosive rolling

0

B0

- -

100%

1

B1

BR1

98%, each nonbinding length must be less than 75mm, area less than 45cm2

2

B2

BR2

95%, each nonbinding area must be less than 65cm2


  • GB/T 8165 TI- Stainless Steel Compound board and ribbon

Type

Product grade

Binding Rate Requirement

Explosive welding

Explosive rolling

1

B1

BR1

100%, nonbinding length less than 50mm, area less than 9cm2 is allowed

2

B2

BR2

99%, each nonbinding length must be less than 50mm, area less than 20cm2

3

B3

BR3

95%, each nonbinding length must be less than 75mm, area less than 45cm2

  • NB/T 47002 explosive welding compound board for pressure vessel

Type

Product grade

Binding Rate Requirement

Explosive welding

Explosive rolling

1

B1

- -

100%

2

B2

- -

99%, each nonbinding length must be less than 50mm, area less than 20cm2

3

B3

- -

95%, each nonbinding length must be less than 75mm, area less than 45cm2

  • Ti and Ti alloys

Product Type

Material

Specification(mm)

Applications

Ti/Steel

TA1,TA2,TA9,TA10

/20R,20g,16MnR, 16Mn, Q235 etc

1~12/3~120*2000*8000

Petroleum, vacuum salt making, chlor-alkali,  food,  fertilizer, container, electroplate, metallurgy

Ti/Stainless Steel

TA1,TA2,TA9,TA10

/ various stainless steel etc

1~12/2~120*2000*8000

Petroleum, chlor-alkali, aerospace, astronavigation,  low temperature,  food, light industry, medicine

Ti/Al

TA1,TA2,TA9,TA10

/L, LY,LF etc

1~10/2~50*2000*8000

Aerospace, chemistry, naval vessel, cooker, brazing filler metal,

Ti/Cu

TA1,TA2,TA9,TA10

/T, H, Q, B etc

1~10/2~50*2000*8000

Electricity, electrolysis, hydrometallurgy,

Ti/Ni

TA1, TA2, TA9, TA10

/N2, N4, N6 etc

1~10/2~50*2000*8000

Metallurgy


Besides, Yuxi can provide customized metal cladding materials supported by advanced explosive cladding technology.