Take advantage of cathodic protection materials to build a wonderful tomorrow
Cathodic Protection technology is the technology to stop or prevent the protected metal structure from electrochemical corrosion. Reasonable cathodic protection can lengthen the service life of metal structure and ensure its safe operation.
Basic introduction
1   Hydrochloric acid corrosion inhibitor
2   Nitric Acid Corrosion Inhibitor
3   Anti-Freeze Solution Corrosion Inhibitor
4   Chlorcosane Corrosion Inhibitor
5   Anti-Scale Corrosion Inhibitor
6   Anodic Corrosion Inhibitor

Hydrochloric acid corrosion inhibitor

Application: Hydrochloric acid corrosion inhibitor will slow down the corrosion rate of metal in the hydrochloric acid. It is applicable for hydrochloric acid in various concentration and temperature. It applies to carbon steel, copper and other metal materials.

Feature: The hydrochloric acid corrosion inhibitor has the feature of stable performance, simple operation, small dosage, It is high efficiency, low cost, no-toxic, odourless, environmental friendly. It will cause little harm to metal structure and there will be no acid mist.

Index:

Index

Parameter

Index

Parameter

Status

Yellow gradule

Flammability

Non-inflammable,non-explosive

Acid and alkali

Nearly neutual

Corrosivity

Non-corrosive

Active matter content

98%

Toxicity

Non-toxic


Nitric Acid Corrosion Inhibitor

Application: Nitric acid corrosion inhibitor is used in less than 20% nitric acid under room temperature(below 40 degrees) to slow down the corrosion rate of metal substrate. It has good corrosion inhibition effect in various chemical pickling process. It is suitable for stainless steel, carbon steel, copper, aluminum, titanium metal material and the combination of different materials of pickling.

Feature:The nitric acid corrosion inhibitor is yellow powder. It has the feature of stable performance, simple operation, small dosage, It is high efficiency, low cost, no-toxic, odourless, environmental friendly. It will cause little harm to metal structure and there will be no acid mist.

Index:

Index

Parameter

Index

Parameter

Status

Yellow gradule

Flammability

Non-inflammable,non-explosive

Acid and alkali

Nearly neutual

Corrosivity

Non-corrosive

Active matter content

98%

Chloridion

Free


Anti-Freeze Solution Corrosion Inhibitor

Application: Anti-freeze solution corrosion inhibitor is used in antifreeze water based in sodium chloride, calcium chloride, ferric chloride. It will slow down corrosion from these inorganic salts and prolong the service life of equipment.

Feature: Antifreeze water corrosion inhibitor consists of all kinds of efficient corrosion inhibitors of organic compounds. Its features will remain the same for a long time. It has the feature of stable performance, simple operation, small dosage, It is high efficiency, low cost, no-toxic, odourless, environmental friendly. It will cause little harm to metal structure.

Index:

Index

Parameter

Index

Parameter

Status

Powder

Flammability

Non-inflammable,non-explosive

Acid and alkali

Near Alkaline

Corrosivity

Non-corrosive

Active matter content

98%

Inhibitory Performance

Good


Chlorcosane Corrosion Inhibitor

Application:Chlorcosane corrosion inhibitor is widely used in anti-friction solution such as chlorinated paraffin, carbon telrachloride. It can be added directly in lubricating oil containing extreme pressure agent and stop the metal corroding from the agents.

Feature:

1  Outstanding corrosion inhibition, rust resistance, moisture resistance, anti-moisture, anti-salt mist performance.

2  It is compatible to the chlorine pressure agents.

3  The chlorinated paraffin inhibitor has good anti-friction effect and can effectively enhance the chlorine anti-wear of chlorine pressure agents.

4  Excellent abrasion resistance under high speed, high temperature stability, anti-sintering performance.

5  Good oil solubility

Index:

Index

Parameter

Appearance

Yellow liquid

Specific Gravity

0.1

Smell

Pleasant smell


Anti-Scale Corrosion Inhibitor

Application:The anti-scale corrosion inhibitor consists of organic phosphoric acid, polycaboxylic acid, carbon steel corrosion inhibitor, Copper and Aluminum corrosion inhibitor. It has good chelating disperse function with carcium carbonate, phosphate scales and has good corrosion inhibition to carbon steel, copper and aluminum. It is mainly used in circulating cooling water of machine tool. The corrosion inhibition effect is good.

Feature: The anti-scale corrosion inhibitor has excellent anti-scale, and corrosion inhibition performance. It can maintain normal production and lengthen the service life of equipment.

Index:

Index

Parameter

Appearance

Yellow or brown red

Density( 20) g/cm3

1.10±0.1

PH value(1% water solution)

2.0±1.0


Anodic Corrosion Inhibitor

Application:Anodic corrosion inhibitor is a kind of cationic imidazoline sewage corrosion inhibitors, mainly used in oilfield water injection system and other industrial water cycle system.

Feature:The product has a strong water dispersion, good liquidity, high corrosion rate.

Index:

Index

Parameter

Appearance

Uniform liquid

PH value

5~9

Pour point

-5

Open flash point

50

Solubility

Water soluble

Emulsifying tendency

No

Compatibility

It will not reduce performance of other drug

Inhibition rate %

70