Specification
Chemical and Electrochemical Properties
|
Grade 1 (SiFe Alloy) |
Grade 3 (SiFeCr Alloy) |
BS1591 |
Carbon% |
0.65-1.10 |
0.70-1.10 |
1.40max |
Manganese% |
1.50 max |
1.50 max |
0.50max |
Silicon% |
14.20-14.75 |
14.20-14.75 |
14.25-15.25 |
Chromium% |
0.50 max |
3.25-5.00 |
0.50max |
Molybdenum% |
0.50 max |
0.20 max |
N/A |
Copper% |
0.50 max |
0.50 max |
N/A |
Sulphur% |
N/A |
N/A |
0.10max |
Phosphorus% |
N/A |
N/A |
0.25max |
Iron% |
Balance |
Balance |
Balance |
Current density in soil/fresh water |
Current density in salt water |
Consumption Rate in soil/fresh water |
Consumption Rate in salt water |
10Amp / square.meter |
30-50Amp / square meter |
0.15kg/A.y |
0.5kg/A.y |
Serial No.
Specification (mm)
Surface(m2)
Nominal Weight(Kg)
ΦA X B
ΦC
YS-R01
38
x 1220
63
0.15
10.50
YS-R02
38
x 1524
63
0.19
13.00
YS-R03
51
x 1220
76
0.20
18.00
YS-R04
51
x 1524
76
0.25
22.00
YS-R05
76
x 1220
102
0.30
40.00
YS-R06
76
x 1524
102
0.37
49.00
1 Low resistance center connection is typically for tubular anode to compensate for end effect, because more current discharges from the anode end than the middle.
2 More economics because of higher utilization than traditional stick anode, tubular anode can use 85-90% of its mass weight while stick anode only 60-70%.
3 More surface area per kilogram which reduce the anode current density.
4 Tubular anode can be casted to 2134mm long while stick anode only limited to 1524mm, which brings the advantage of lower resistance than stick type.
5 Easy transportation and handling due to more surface area per unit weight, for a certain current requirement the weight of tubular anode is much smaller than stick anode.
Yuxi manufacture a full line of tubular anodes using improved centrifugal casting technique, and this helps us to bring our anode quality to a new level compare to gravity casting.
1 More dense and homogenous structure
2 Stipple effect increase surface area
3 Level 1 X-Ray detection AS per ASTM E186/E446
4 More impact resistance due to higher density
Dimension and Weight
Serial
No.
Specification(mm)
Weight(Kg)
ΦA×B
YS-T01
58X1524
15
YS-T02
58X2133
21
YS-T03
71X1524
20.5
YS-T04
71X2133
29
YS-T05
96X1524
28
YS-T06
96X2133
39
YS-T07
124X1524
36
YS-T08
124X2133
50
YS-T09
124X1524
57
YS-T10
124X2133
80
Inspection and Testing:
1 Chemical Analysis by spectrometer
2 Dimension and Weight Check
3 X Ray Detection
4 Mechanical Impact Testing
HSCI anode can be buried directly in the groundbed, and besides that canister type anode is produced to easy installation for a deep well.
Canister material |
Galvanized Steel Sheet |
Canister size |
203mm dia. at length 1524mm, 2000mm, 3000mm |
Eye bolt for easy installation |
Yes |
Cable |
HMWPE, XLPE/PVC, Kynar/HMPWE |