Ultra-Clear Polyaspartic Coating for Surface Finish (M-608)
YUXI‘s M–608 solvent based polyaspartic coating is a non-yellowing, heavy-duty topcoat designed for application over wooden flooring, cement based overlayment or non-skid surfaces requiring a high sheen clear finish. This specially formulated polyaspartic coating cures fast to achieve a transparent protective covering subject to light to medium loads. It provides superior protection through its excellent resistance to stains, chemicals and damaging UV rays.
Description
—— Advantages ——
- Environmental friendliness: high solids, lower volatile organic compounds (VOCs)
- High gloss, non-yellowing
- Superior weather resistance and UV stability: withstand harsh conditions, including UV exposure, moisture and temperature fluctuations, without compromising their performance
- High-performance water insulation capability: seal against the penetration of the moisture and water
- Outstanding chemical and stain resistance: form a robust protective layer that resists to oil, grease and strong detergents
- Good abrasion and scratches resistance
- Fast application and quick curing
- Low maintenance, easy to clean
- Exceptional durability and longevity
—— Field of Use ——
YUXI’s polyaspartic coating can be successfully applied on the substrates in the following :
- Cementitious substrates, such as concrete surface, cement board, mortar, etc.
- Plaster structure, such as gypsum board or similar surface
- High porous substrates, such as brick, marble and natural stones
- Non-porous substrates, such as ceramic tiles or other masonry structure
- Wooden surfaces, such as parquet floor or otherwise
- Cement-bound substrate coated with primer and epoxy
* For application to other substrates or scopes of use, please contact our technician for further information.
—— Practical Application ——
Our clear polyaspartic coating is highly versatile for use in both indoor and outdoor applications. It is ideally suited for residential spaces, institutional facilities, high-end commercial environments, retail settings or any areas where stain resistance and cleanability are important.
—— Technical Characteristics ——
The parameters are given under specific test conditions in accordance with the requirements specified in the standards.
The results are performed under lab controllable conditions. These values may vary based on the application, climatology, or substrate conditions.
*Actual required DFT may vary in certain applications, please contact us for technical clarification.
Parameters
| Packaging | Component A: 18kg/Metal Pail, Component B: 18kg/Metal Pail |
|---|---|
| Storage Temperature | 5ËšC~35ËšC |
| Shelf Life | 12 months |
| Application Method | Air Sprayer, Airless Sprayer, Brush, Roller |
