+86(574)8388 2233
CONTACT OUR EXPERTS
PRODUCT CATEGORIES >> AC MITIGATION
FIND PRODUCTS QUICKLY
  • PRODUCT INTRODUCTION
  • PDF Download

Pipeline corrosion, caused by induced AC current, is attributed to high voltage AC power lines in close proximity to a pipeline system. The corrosion can be extremely aggressive, far exceeding the normal corrosion rate caused by corrosive soils. One of the most popular mitigation solutions is a linear grounding system that is installed in parallel to the pipeline.


Compared with bare copper and zinc ribbon, this long-line “cable” is a superior grounding material that provides an effective electrical path to remove or discharge AC current from the pipeline to the ground. It is comprised of a bare stranded
copper conductor encased in low resistance backfill with corrosion inhibitors, and then wrapped in a synthetic sock.


Quality Copper Conductor

Our power cable delivers the required current over considerable distance without incurring substantial longitudinal voltage drop. 


Evenly Backfill Filling
High performance calcined petroleum coke breeze is tightly pre-packaged and evenly distributed all around the copper conductor, serving as the active matrix in which the electrochemical reactions take place.
● Carbon Content: 98.5% Min.
● Ash: 0.6%
● Moisture: 0.05%
● Volatiles: Nil(950ºC)
● Resistivity: 0.1 Ω.cm [per G.L.C.-C-12A, 10 bar (145psi) @23ºC (73ºF)


Acid-resistant Braid Fabric Jacket
Our AC mitigation ribbon is prepackaged with porous, non-woven synthetic sleeve. This tough sleeve is sewn using a poly two or four-thread double interlocking stitch, which prevents the seam from separating during installation, or when stored in high temperature conditions.

● Bursting Strength: 500 N [per ISO 3303]
● Abrasion Resistance: 100 Cycles to Failure [per ASTM D-4157]
● Fluid Resistance: Pass [6-month Immersion Test]
● Chlorine Resistance: Pass [6-month Immersion Test]
● UV Resistance: 55% Tear Strength Loss [per ASTM G-53: 8 hrs @ 60ºC (140ºF), 4 hrs condensation @ 50ºC (122ºF)]


Reel Packing
Our AC mitigation ribbon can be packed on wooden or steel reel as required. It is normally installed right from the factory provided reel into the trench for easy transportation.




ZHEJIANG YUXI CORROSION CONTROL CORPORATION
CONTACT
Tel:+86(574)8388 2233
Fax: +86(574)8388 2238
info@yuxi-anode.com
Ningbo Headquarter
Add:767 Liangzhu RD, Ningbo 315100, P.R,China
Factory
Add:Dongxi Industrial Zone, Xinqiao, Xiangshan, Ningbo, 315725, China