AC Mitigation Electrode
Inner Structure of AC Mitigation Ribbon

Flexible Linear Electrode for AC Mitigation

Pipeline corrosion, caused by induced AC current, is attributed to high voltage AC power lines in close proximity to a pipeline system. The corrosion can be extremely aggressive, far exceeding the normal corrosion rate caused by corrosive soils. One of the most popular mitigation solutions is a linear grounding system that is installed in parallel to the pipeline. Compared with bare copper and zinc ribbon, YUXI's long-line "ribbon" is a superior grounding material that provides an effective electrical path to remove or discharge AC current from the pipeline to the ground. It is comprised of a bare stranded copper conductor encased in low resistance backfill with corrosion inhibitors, and then wrapped in a synthetic sock.
Compare
Zinc Ribbon Anode
Zinc Ribbon Anode

Zinc Ribbon Anode

Extruded around a centralised galvanized steel wire core, our zinc ribbon anode is ideal for unattended applications, where impressed current cathodic protection systems or constant monitoring is not feasible. Besides, zinc ribbon anodes also provide a cost effective method of AC mitigation on pipelines, or regarded as grounding mats for alienating current mitigation.
Compare
Zinc Earthing Cell

Zinc Earthing Cell (Single Unit)

YUXI's zinc earthing cell is mainly composed of a cast zinc stick with steel rod insert. It is widely used for mitigating corrosion on well coated metallic structures requiring minimal current output. They are popularly used as grounding cells on electrical equipment (such as power stations, transmission line towers, etc.) and across insulators on pipelines to limit high voltages.
Compare
Zinc Earthing Cell-

Zinc Earthing Cell (Dual Unit)

YUXI's zinc earthing cell is mainly composed of a cast zinc stick with steel rod insert. It is widely used for mitigating corrosion on well coated metallic structures requiring minimal current output. They are popularly used as grounding cells on electrical equipment (such as power stations, transmission line towers, etc.) and across insulators on pipelines to limit high voltages.
Compare
Bagged Zinc Anode
Prepackaged Zinc Anode Structure

Prepackaged Zinc Anode

YUXI's packaged zinc anode is mainly composed of a cast zinc anode centrally packed in a permeable cotton bag or cardboard tube with highly hygroscopic backfill mixture. This type of zinc anodes are recommended for use in soils with resistivities below 1000 ohm-cm. Because zinc anodes have a lower driving potential than magnesium, our pre-packaged zinc anodes are the most effective method of mitigating corrosion on well coated metallic structures requiring minimal current output. They are popularly used as grounding cells on electrical equipment (such as power stations, transmission line towers, etc.) and across insulators on pipelines to limit high voltages.
Compare
Aluminum Anode Rod

Aluminum Anode Rod

Casted from high-voltage and high-potential alloy, YUXI's aluminum anode rod is designed to meet the standard GALVALUM III, containing nominal amounts of indium, zinc, and silicon. It has a proven track record for delivering superior cathodic protection for any type of structure requiring a compact solution in highly corrosive saltwater/brines with elevated temperatures. It is typically applied in heater treaters, heat exchangers, salt water storage tanks, oilfield tanks, skimmers, oil-separation vessels, pressure vessels and other production vessels.
Compare
Cylindrical Aluminum Heat Treater Anode with Blue Cap
Cylindrical Aluminum Heat Treater Anode with Red Cap

Heat Treater Aluminum Anode Rod

Casted from high-voltage and high-potential alloy, our aluminum anode is designed to meet the standard GALVALUM III, containing nominal amounts of indium, zinc, and silicon. It has a proven track record for delivering superior cathodic protection for any type of structure requiring a compact solution in highly corrosive saltwater/brines with elevated temperatures. It is typically applied in heater treaters, heat exchangers, salt water storage tanks, oilfield tanks, skimmers, oil-separation vessels, pressure vessels and other production vessels.
Compare
Aluminum Anode Ball
Heat Treater Aluminum Anode Ball

Heat Treater Aluminum Anode Ball

This aluminum anode ball is a compact easily replaced sacrificial anode which is installed in heat treaters, pressure vessels and other production vessels. It works optimally at relatively high temperatures and low chloride saltwater or freshwater environments.
Compare
Zinc Condenser Anode-Round
Zinc Condenser Anode

Bolted Zinc Condenser Anode (Round Shape)

YUXI manufactures a full product line of zinc anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Zinc Condenser Anode
Zinc Condenser Anode

Bolted Zinc Condenser Anode (Square Shape)

YUXI manufactures a full product line of zinc anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Zinc Condenser Anode

Bolted Zinc Condenser Anode (Rectangular Shape)

YUXI manufactures a full product line of zinc anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Round Aluminum Condenser Anode

Bolted Aluminum Condenser Anode (Round Shape)

YUXI manufactures a full product line of alluminum anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Aluminum Condenser Anode
Aluminum Condenser Anode

Bolted Aluminum Condenser Anode (Square Shape)

YUXI manufactures a full product line of alluminum anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Aluminum Condenser Anode
Aluminum Condenser Anode

Bolted Aluminum Condenser Anode (Rectangular Shape)

YUXI manufactures a full product line of alluminum anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Magnesium Condenser Anode
Magnesium Anode for Condenser and Process Vessel

Bolted Magnesium Condenser Anode (Round Shape)

YUXI manufactures a full product line of magnesium anode slabs and blocks, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. Our condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Magnesium Condenser Anode
Bolted Magnesium Condenser Anode (Square Shape)

Bolted Magnesium Condenser Anode (Square Shape)

YUXI manufactures a full product line of magnesium anode slabs and blocks, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. Our condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Magnesium Condenser Anode-Rectangular

Bolted Magnesium Condenser Anode (Rectangular Shape)

YUXI manufactures a full product line of magnesium anode slabs and blocks, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. Our condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Magnesium Condenser Anode with Two Cast-in Galvanized Steel Straps

Rectangular Magnesium Condenser Anode with Double Straps (Weld-On)

YUXI manufactures a full product line of magnesium anode slabs and blocks, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. Our condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Pure Iron Anode Rod

Pure Iron Anode Rod

The pure iron anode is especially useful in stress corrosion of copper alloys. Therefore, it is mostly applied to the corrosion protection of copper alloy tube of heat exchanger, condenser, pumps, fresh water facility, desalination plant (evaporator, brine heater) and cooling systems of power plants.
Compare
Cylindrical Pure Iron Anode

Pure Iron Anode (Cylindrical Shape)

YUXI's pure iron anode is especially useful in stress corrosion of copper alloys. Therefore, it is mostly applied to the corrosion protection of copper alloy tube of heat exchanger, condenser, pumps, fresh water facility, desalination plant (evaporator, brine heater) and cooling systems of power plants.
Compare
Round Pure Iron Anode

Bolted Pure Iron Anode (Round Shape)

The pure iron anode is especially useful in stress corrosion of copper alloys. Therefore, it is mostly applied to the corrosion protection of copper alloy tube of heat exchanger, condenser, pumps, fresh water facility, desalination plant (evaporator, brine heater) and cooling systems of power plants.
Compare
Rectangular Pure Iron Anode
Rectangular Pure Iron Anode-2

Pure Iron Anode (Rectangular Shape)

YUXI's pure iron anode is especially useful in stress corrosion of copper alloys. Therefore, it is mostly applied to the corrosion protection of copper alloy tube of heat exchanger, condenser, pumps, fresh water facility, desalination plant (evaporator, brine heater) and cooling systems of power plants.
Compare
Bolted Square Pure Iron Anode

Bolted Pure Iron Anode (Square Shape)

The pure iron anode is especially useful in stress corrosion of copper alloys. Therefore, it is mostly applied to the corrosion protection of copper alloy tube of heat exchanger, condenser, pumps, fresh water facility, desalination plant (evaporator, brine heater) and cooling systems of power plants.
Compare
Bolted Rectangular Pure Iron Anode

Bolted Pure Iron Anode (Rectangular Shape)

YUXI's pure iron anode is especially useful in stress corrosion of copper alloys. Therefore, it is mostly applied to the corrosion protection of copper alloy tube of heat exchanger, condenser, pumps, fresh water facility, desalination plant (evaporator, brine heater) and cooling systems of power plants.
Compare

Select at least 2 products
to compare