Drive-In Magnesium Anode
Drive-In Magnesium Anode

Drive-in Magnesium Anode with Lead Wire & Clamp

This drive-in anode is an high-purity extruded magnesium rod with a steel core, which has a machined "spike" or "45-degree angle cut" end for easy penetration through the soil. An adjustable stainless steel hose clamp with set screw is included to allow easy attachment of the anode to the protected structure.The anode is fitted with a steel hexagonal head and threaded UHMW polyethylene driving cap. Thus, the lead wire and soldered connection are protected during installation.
Compare
Magnesium Ribbon Anode

Magnesium Ribbon Anode

As a flexible anode material, magnesium ribbon anode consists of an extruded ribbon of magnesium around a central continuous galvanised steel core which ensures a uniform current and efficient electrical discharge. Due to larger area-to-mass ratio, magnesium ribbon anode can provide higher current outputs when compared to other magnesium anodes.
Compare
Zinc Ribbon Anode
Zinc Ribbon Anode

Zinc Ribbon Anode

Extruded around a centralised galvanized steel wire core, our zinc ribbon anode is ideal for unattended applications, where impressed current cathodic protection systems or constant monitoring is not feasible. Besides, zinc ribbon anodes also provide a cost effective method of AC mitigation on pipelines, or regarded as grounding mats for alienating current mitigation.
Compare
Zinc Earthing Cell

Zinc Earthing Cell (Single Unit)

YUXI's zinc earthing cell is mainly composed of a cast zinc stick with steel rod insert. It is widely used for mitigating corrosion on well coated metallic structures requiring minimal current output. They are popularly used as grounding cells on electrical equipment (such as power stations, transmission line towers, etc.) and across insulators on pipelines to limit high voltages.
Compare
Zinc Earthing Cell-

Zinc Earthing Cell (Dual Unit)

YUXI's zinc earthing cell is mainly composed of a cast zinc stick with steel rod insert. It is widely used for mitigating corrosion on well coated metallic structures requiring minimal current output. They are popularly used as grounding cells on electrical equipment (such as power stations, transmission line towers, etc.) and across insulators on pipelines to limit high voltages.
Compare
Bagged Zinc Anode
Prepackaged Zinc Anode Structure

Prepackaged Zinc Anode

YUXI's packaged zinc anode is mainly composed of a cast zinc anode centrally packed in a permeable cotton bag or cardboard tube with highly hygroscopic backfill mixture. This type of zinc anodes are recommended for use in soils with resistivities below 1000 ohm-cm. Because zinc anodes have a lower driving potential than magnesium, our pre-packaged zinc anodes are the most effective method of mitigating corrosion on well coated metallic structures requiring minimal current output. They are popularly used as grounding cells on electrical equipment (such as power stations, transmission line towers, etc.) and across insulators on pipelines to limit high voltages.
Compare
High Temperature Zinc Anode
High Temperature Zinc Anode-Round Type

High Temperature Zinc Anode (Round Type)

It is known that common zinc alloys have a tendency to fail at temperatures above 60°C. Above this temperature, zinc alloys can suffer from intergranular corrosion, especially when buried in saline mud. When at high temperature, common zinc anodes may become ineffective or even detrimental to the iron and steel structure intended to be protected by the sacrificial CP system. The zinc anode suffers passivation and polarity reversal —— a dangerous condition in which zinc and steel reverse their natural polarity and steel becomes anodic to zinc, corroding itself and protecting the anode. To meet the demand of anode applications at high temperature, YUXI has developed this specialized zinc anode that can operate successfully at elevated temperatures up to 90°C.
Compare
High Temperature Zinc Anode
High Temperature Zinc Anode

High Temperature Zinc Anode (Square Type)

It is known that common zinc alloys have a tendency to fail at temperatures above 60°C. Above this temperature, zinc alloys can suffer from intergranular corrosion, especially when buried in saline mud. When at high temperature, common zinc anodes may become ineffective or even detrimental to the iron and steel structure intended to be protected by the sacrificial CP system. The zinc anode suffers passivation and polarity reversal —— a dangerous condition in which zinc and steel reverse their natural polarity and steel becomes anodic to zinc, corroding itself and protecting the anode. To meet the demand of anode applications at high temperature, YUXI has developed this specialized zinc anode that can operate successfully at elevated temperatures up to 90°C.
Compare
High Temperature Zinc Anode
High Temperature Zinc Anode

High Temperature Zinc Anode (Rectangular Type)

It is known that common zinc alloys have a tendency to fail at temperatures above 60°C. Above this temperature, zinc alloys can suffer from intergranular corrosion, especially when buried in saline mud. When at high temperature, common zinc anodes may become ineffective or even detrimental to the iron and steel structure intended to be protected by the sacrificial CP system. The zinc anode suffers passivation and polarity reversal —— a dangerous condition in which zinc and steel reverse their natural polarity and steel becomes anodic to zinc, corroding itself and protecting the anode. To meet the demand of anode applications at high temperature, we have developed this specialized zinc anode that can operate successfully at elevated temperatures up to 90°C. Our high temperature zinc anode is designed for use in tanks intended for the carriage of liquid cargo with high temperature exposure, hot subsea pipelines and heat exchangers.
Compare
Embedded Galvanic Anode
Embedded Galvanic Anode

Embedded Galvanic Anode (Bar Type)

YUXI's zinc-based discrete anode is encapsulated within a alkali-activated mortar shell. The enhanced formulated cementitious mortar with an internal pH of 14 or greater keeps the zinc core active over the life of the anode. It can not only been cast into new concrete construction to protect the reinforcement from further corrosion damage, but also repair the corroded reinforcing steel in concrete patch repairs. Our anode is capable of more than 10 years of protection depending on design and conditions.
Compare
Embedded Galvanic Anode-Dangling Type

Embedded Galvanic Anode (Dangling Type)

YUXI's zinc-based discrete anode is encapsulated within a alkali-activated mortar shell. The enhanced formulated cementitious mortar with an internal pH of 14 or greater keeps the zinc core active over the life of the anode. It can not only been cast into new concrete construction to protect the reinforcement from further corrosion damage, but also repair the corroded reinforcing steel in concrete patch repairs. Our anode is capable of more than 10 years of protection depending on design and conditions.
Compare
Embedded Galvanic Anode

Embedded Galvanic Anode (Round Type)

YUXI's zinc-based discrete anode is encapsulated within a alkali-activated mortar shell. The enhanced formulated cementitious mortar with an internal pH of 14 or greater keeps the zinc core active over the life of the anode. It can not only been cast into new concrete construction to protect the reinforcement from further corrosion damage, but also repair the corroded reinforcing steel in concrete patch repairs. Our anode is capable of more than 10 years of protection depending on design and conditions.
Compare
Aluminum Anode Rod

Aluminum Anode Rod

Casted from high-voltage and high-potential alloy, YUXI's aluminum anode rod is designed to meet the standard GALVALUM III, containing nominal amounts of indium, zinc, and silicon. It has a proven track record for delivering superior cathodic protection for any type of structure requiring a compact solution in highly corrosive saltwater/brines with elevated temperatures. It is typically applied in heater treaters, heat exchangers, salt water storage tanks, oilfield tanks, skimmers, oil-separation vessels, pressure vessels and other production vessels.
Compare
Cylindrical Aluminum Heat Treater Anode with Blue Cap
Cylindrical Aluminum Heat Treater Anode with Red Cap

Heat Treater Aluminum Anode Rod

Casted from high-voltage and high-potential alloy, our aluminum anode is designed to meet the standard GALVALUM III, containing nominal amounts of indium, zinc, and silicon. It has a proven track record for delivering superior cathodic protection for any type of structure requiring a compact solution in highly corrosive saltwater/brines with elevated temperatures. It is typically applied in heater treaters, heat exchangers, salt water storage tanks, oilfield tanks, skimmers, oil-separation vessels, pressure vessels and other production vessels.
Compare
Aluminum Anode Ball
Heat Treater Aluminum Anode Ball

Heat Treater Aluminum Anode Ball

This aluminum anode ball is a compact easily replaced sacrificial anode which is installed in heat treaters, pressure vessels and other production vessels. It works optimally at relatively high temperatures and low chloride saltwater or freshwater environments.
Compare
Zinc Condenser Anode-Round
Zinc Condenser Anode

Bolted Zinc Condenser Anode (Round Shape)

YUXI manufactures a full product line of zinc anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Zinc Condenser Anode
Zinc Condenser Anode

Bolted Zinc Condenser Anode (Square Shape)

YUXI manufactures a full product line of zinc anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Zinc Condenser Anode

Bolted Zinc Condenser Anode (Rectangular Shape)

YUXI manufactures a full product line of zinc anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Round Aluminum Condenser Anode

Bolted Aluminum Condenser Anode (Round Shape)

YUXI manufactures a full product line of alluminum anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Aluminum Condenser Anode
Aluminum Condenser Anode

Bolted Aluminum Condenser Anode (Square Shape)

YUXI manufactures a full product line of alluminum anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Aluminum Condenser Anode
Aluminum Condenser Anode

Bolted Aluminum Condenser Anode (Rectangular Shape)

YUXI manufactures a full product line of alluminum anodes, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. The condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Magnesium Condenser Anode
Magnesium Anode for Condenser and Process Vessel

Bolted Magnesium Condenser Anode (Round Shape)

YUXI manufactures a full product line of magnesium anode slabs and blocks, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. Our condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Magnesium Condenser Anode
Bolted Magnesium Condenser Anode (Square Shape)

Bolted Magnesium Condenser Anode (Square Shape)

YUXI manufactures a full product line of magnesium anode slabs and blocks, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. Our condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare
Magnesium Condenser Anode-Rectangular

Bolted Magnesium Condenser Anode (Rectangular Shape)

YUXI manufactures a full product line of magnesium anode slabs and blocks, suitable for use in heat exchangers, condenser water boxes, cooling towers, intercoolers and tank interiors. Our condenser anode is available as either bare or plastisol coated. The plastisol (polyvinyl chloride) coating on the sides, ends, and faying surfaces serves as an excellent current barrier shield.
Compare

Select at least 2 products
to compare