Solar Powered Transformer Rectifier
Solar energy is the most abundant energy source on earth, and can be used to produce other renewable energy sources. This solar powered rectifier, also referred to as photovoltaic transformer, is powered by a DC battery bank with a controlled automatic output voltage. The battery bank charges during daylight hours by poly-crystalline solar panels. Our rectifier is built and controlled by the latest logic controller with the ability to do precise control. It is designed for remote areas with no power access. It can be applied for the cathodic protection of gas/oil pipelines, storage tanks, ocean freighters, etc.
Titanium Power Feeder Kit
This titanium power feed assembly unit is a specialized component used in the cathodic protection system to establish a secure and efficient electrical connection between the power source and the CP system. It enables the transfer of DC power from the power supply to the anode or anode bed, which helps to mitigate corrosion on metallic structures. Our titanium power feed assemblies are often applied to power connections in under-tank grid anode systems. It serves as the link between the DC current feeder cable and the titanium conductor bar.
Titanium Conductor Bar
Titanium conductor bar is usually be used along with the MMO ribbon anode, acting as an inert conductor to evenly distribute the CP current throughout the system. MMO ribbon is often spot welded to titanium conductor bar at the point of crossover, forming a grid arrangement. It reduces attenuation losses and connects to the positive cable through rod connectors.
Mixed Metal Oxides (MMO) Coated Vane Anode
YUXI's vane anode consists of four arms constructed of titanium substrate coated with mixed metal oxide (IrO2/Ta2O5) conductive film. As a key part to compose the pyramid anode, it is generally mounted on a high-density waterproof concrete base, which is to provide negative buoyancy and enhance the stability at sea-bottom. Attached with double-armored insulated cable, this vane anode can be fully assembled in site and lower onto the seabed. This vane anode is ideally suited for cathodic protection of offshore platforms, sheet piling, jetty piles and all similar facilities.
Flexible Linear Electrode for AC Mitigation
Pipeline corrosion, caused by induced AC current, is attributed to high voltage AC power lines in close proximity to a pipeline system. The corrosion can be extremely aggressive, far exceeding the normal corrosion rate caused by corrosive soils. One of the most popular mitigation solutions is a linear grounding system that is installed in parallel to the pipeline.
Compared with bare copper and zinc ribbon, YUXI's long-line "ribbon" is a superior grounding material that provides an effective electrical path to remove or discharge AC current from the pipeline to the ground. It is comprised of a bare stranded copper conductor encased in low resistance backfill with corrosion inhibitors, and then wrapped in a synthetic sock.
MMO/Ti Wire Flexible Linear Anode
YUXI's flexible MMO linear anode is a kind of anode which is prepackaged in a porous, non-woven fabric "sock" that contains high conductivity calcined petroleum coke breeze —— enhancing the abrasion and damage resistance. It improves the current distribution efficiency and helps prevent over-voltage problems such as hydrogen generation and associated rapid coating disbondment.
Our MMO linear anode consists of titanium wire coated with Ir-Ta mixed metal oxide catalyst, running in parallel with an insulated copper conductor. It is used for impressed current cathodic protection of buried structures, such as buried oil (gas) pipelines, underground tank, petrochemical container etc.
Polymer Flexible Linear Anode
This continuous cable-like anode is an integrated auxiliary anode composed of a copper wire and a conductive polymer sheath. The copper core serves as a low resistance bus bar to deliver the required current over considerable distance without incurring substantial longitudinal voltage drop. And the extruded polymer layer seals the copper wire from chemical attack.
Mixed Metal Oxides (MMO) Coated Tubular Anode
As the most common type of mixed metal oxide(MMO) anodes, our tubular anode is popular for use in all impressed current cathodic protection applications.
Mixed Metal Oxide (MMO) Coated Tubular Anode String
YUXI's MMO tubular anode is generally connected in strings with electrical cable by specialized pure copper connector. Normally, the anode string is pre-assembled in our factory and ready for installation on-site. All connections are encapsulated with good epoxy resin to create a waterproof seal. We recommend dual-insulated cable (such as PVDF/ HMWPE) for use in ground bed with high level of chlorides. While HMWPE is an economical choice for shallow vertical and horizontal surface beds with no chlorides. Marine cable is ideal for seawater applications due to its high current capacity and flexibility.
Mixed Metal Oxide (MMO) Coated Titanium Clad Copper Wire Anode
Our wire anodes are composed of titanium clad copper wire which is bonded to mixed metal oxide coating. Capable of superior operating performance, it can be used in both soil and aqueous environment, such as fresh, brackish or saltwater.
Mixed Metal Oxide (MMO) Coated Titanium Wire Anode
YUXI's MMO wire anode consists of pure titanium wire coated with high-quality mixed metal oxides catalyst. It can be used for impressed current cathodic protection in soil environment and chloride electrolyte.
Mixed Metal Oxide (MMO) Coated Titanium Ribbon Anode
MMO ribbon anode is used for cathodic protection applications where there is a high current demand and limited space. It can be directly buried into fine sand without any need for carbon backfill.
Mixed Metal Oxides (MMO) Coated Titanium Mesh Ribbon Anode
Typically, MMO mesh ribbon anode is a key component for impressed current cathodic protection of new build reinforcement concrete structures and existing concrete structures. It has been proved to be a very effective way of controlling corrosion of rebar, particularly in hot and saline conditions.
Mixed Metal Oxide (MMO) Coated Discrete Titanium Mesh Anode
YUXI's discrete anode is made of tubular shaped MMO mesh welded with a tinanium strip or rod. It is primarily used for the cost-effective cathodic protection of thick steel reinforced concrete elements in relatively compact structures such as beams, columns or piles in tidal / splash zones where the application of ribbon anodes leads to grout acidification in most cases.
Mixed Metal Oxides (MMO) Coated Discrete Titanium Mesh Anode
YUXI's discrete anode is made of tubular shaped MMO mesh welded with a tinanium strip or rod. It is primarily used for the cost-effective cathodic protection of thick steel reinforced concrete elements in relatively compact structures such as beams, columns or piles in tidal / splash zones where the application of ribbon anodes leads to grout acidification in most cases.
Canistered Mixed Metal Oxides (MMO) Coated Anode
YUXI's canister anode consists of MMO/Ti anode installed in a galvanized steel canister that is filled with calcined petroleum coke breeze backfill. The canister is capped with the cable extending out the top of the anode cap. The actual anode inside the canister can have a wide range of configurations, including tubular, wire, rod, ribbon and mesh types. However, the most common configuration is the tubular anode.
Mixed Metal Oxides (MMO) Coated Probe Anode
YUXI's probe anode is an MMO coated titanium rod anode sealed into a machined stainless steel housing. It is designed for impressed current cathodic protection of heat exchangers, condenser water boxes, pressure vessels, process tank, waterfront structures, pump housings, internal surfaces of pipeline, etc.
Tensioned Mixed Metal Oxide (MMO) Coated Anode String
YUXI's tensioned anode string is an anode array that comprises a series of MMO tubular anodes secured into the perforated PVC casing pipe and chained onto an electrical cable. The terminal anode (the last anode on a string assembly) has a metal loop for attaching a weight. It is a cost-effective option used in the impressed current cathodic protection for the life extension of offshore or marine structures. It can be installed without divers or ROV equipment.
Mixed Metal Oxide (MMO) Coated Anode Sled
Offshore wind power has gone from a marginal industry to a major renewable energy source within the last decade. However, external submerged surfaces of wind turbine foundation are subject to the damaging effects of corrosion around the clock. Impressed current cathodic protection system is the most cost effective, easy-to-maintain and environmentally friendly solution on the market for the protection of offshore wind turbine foundations against corrosion. The system performance is systematically evaluated by an integral remote monitoring system which simplifies protection level check and early warning of possible flaws.
Constructed based on MMO tubular, YUXI's anode sled is an excellent option for corrosion protection to tripod, mono pile and other subsea structure of the wind turbine in shallow water. The anode assembly can be easily completed by lowering it into the water and onto the sea floor or river bottom with minimal labor and effort.
High Silicon Cast Iron Solid Stick Anode
High silicon cast iron anodes are amongst the most widely used anodes for impressed current cathodic protection systems. Due to its high content of silicon, the anode surface is readily and continually oxidized with a thin film of hydrated silicon oxides, which protects the anode from metal pitting. YUXI's high silicon cast iron stick anodes exhibit extraordinary corrosion resistance and low consumption rate in low-pH environment.
High Silicon Cast Iron Tubular Anode
High silicon cast iron anodes are amongst the most widely used anodes for impressed current cathodic protection systems. Due to its high content of silicon, the anode surface is readily and continually oxidized with a thin film of hydrated silicon oxides, which protects the anode from metal pitting. YUXI's high silicon cast iron tubular anodes exhibit extraordinary corrosion resistance and low consumption rate in low-pH environment.
Canistered High Silicon Cast Iron Anode
YUXI's canistered anode consists of a tubular or stick type high silicon cast iron anode firmly pre-packaged in a large spirally wound galvanized mild steel canister that is filled with calcined petroleum coke backfill. The canister housing is only intended to survive transportation and installation. Once installed, the exterior housing is part of the anode system and it is expected to be consumed quickly, leaving behind the anode and coke backfill.
High Silicon Cast Iron Anode Sled
With six heavy high silicon cast iron tubular anodes mounted on a PVC pipe frame filled with reinforced concrete, this anode sled is designed to provide cathodic protection current to offshore structures such as oil platforms, piers, pilings, wharfs and similar structures which usually require relatively high levels of current in seawater. The anodes will be connected to a shore-based rectifier by means of two parallel insulated cables.